That sounds like a great way to do it! @Minus_88
1 Like
Are you trying to strip the insulator of the wire? What I do is I use scissor then I just feel it and carefully cut it to the half and pull the strip. 
thank you, it indeed did work for me that way.
1 Like
You can contact the company for assistance.
Oh no! Maybe try a crimping tool? I hope you’ll be able to figure it out before you run out of wire. Time to call on hubby to help 
What I tend to do is gently using a scalpel and try to get one side out first. The scalpel is thin so it won’t be too hard. I never have any issues doing it that way. I cut one piece at a time and go around the wire
Good luck. I look forward to your next progress update!
Oh nooo, I feel you 
wiring can be so frustrating sometimes!
I actually really enjoy doing the wiring, but it definitely takes a bit of practice. I’ll share a post where I explain what I use, it might help you: 👍 [Quality Post] Spring Sakura Banquet Build Diary – Day 1 Progress 🌸
Also, if you have one, using a wire stripper can make things much easier and avoid cutting the wire by accident!
1 Like
Yes! Walk away even if just an hour. Do not let the frustration build!
If you have acrylic marker, try later to get that and touch up.
For wires, I actually kind of pinch with my finger or fingernail and that usually does it. I also, once done, have been cutting off the excess wire leaving enough to maneuver the battery box. I keep that extra wire! Then if I have a mistake, I can fix!
Hoping this helps!
I feel you with stripping the wires in the older kits! They drive me nuts! I started using a wire stripper and while it’s still tricky because the wires are so thin I found my success rate to be much higher with them. 
Or you can use your finger nails if you keep them long.
I tried that too. The wire is way too thin. I agree, I believe it takes a lot of practice. 
.
The only solution for me now is to wait for my husband to do it. The biggest question is when will he be able to.. ahahaha
Yes. I agree. I will try but Im not confident about my skills.
Momsh, it is too thin. I tried everything. Naubos na yung wires.. wahahahaha
1 Like
Thanks for the suggestion. I still have one more lifeline - my husband! ahaha! But the problem is when will he be available to do it.. 
That is my only way now. But I can imagine him scolding me because the wires are now too short.. ahahaha! Bahala na nga! 
oh a scalpel! I have never tried that.. Thanks for the suggestion!
Im actually done with the other details except for this. I just came from my vacation. Perhaps a break is all I need. I will try again later today.
1 Like
Ohhh…I hope he can help you soon so that you can proceed with your kit.
The wires in your post is thicker than mine. The wires that I have is way too thin.
Thanks for the suggestion. I came from a 5-day vacation so I am hoping I can do it again today. I’m done with everything except for this. If not, I just need to wait for my husband.