📖 [ROKR Journey] Hitting a Snag on the ROKR Shuttle

Need a Hand? DIY & Crafting Tips and Questions
, , ,
21

Hello, according to the manual, “removing the T3 switch” means only taking the T3 switch out of the auxiliary tool, not pulling it out from the circuit board. The reason why the light board did not turn on is that the final step of Test Step 1 has not yet been carried out.

From your description, it seems you have reached the second part of Test Step 1: the light stays on, Motor 1 runs briefly, and Motor 2 runs continuously. When you proceed to Step 4, remove the T3 switch and then insert it back, Motor 1 will continue running and Motor 2 will stop. In the final step, remove the T2 switch and quickly insert it back — the light board will then flash, and the light string will stay on.

Please note: the motor with the yellow and white wires is Motor 1, and the one with the blue and red wires is Motor 2.

image
image1386×635 91.5 KB

22

Thank you so much for your reply. I had somebody send me a YouTube video and I performed the tests again. Lampboard does not light up. I ordered my part yesterday and received confirmation this morning. Again, THANK YOU. @CustomerService

23

Perfect! :rofl: Done and part is on the way.

24

Thank you @Jill_Francisco After testing numerous times, I cannot get the lampboard to come on. They are sending a new part. I just love their customer service.

1 Like
25

UPDATE: I have finally succeeded in getting the lampboard to work. Thank you! @CustomerService

1 Like
26

It looks gorgeous! Great progress so far. Hope you get the motor and lampboard sorted out soon so you can keep going! :flexed_biceps:t2:

27

Oohhh you get there a great result :face_with_hand_over_mouth::sparkles::eyes:

1 Like
28

I finally did…after testing at LEAST 20 times. I had even asked for a replacement part yesterday. This morning, I said to myself…let’s try this ONE more time…Took THREE more tries, but finally worked, so now I am back to building :blush: @Wenbare

3 Likes
29

Thank you @camila_castro

1 Like
30

Yaaaaay :partying_face::partying_face::rofl:

1 Like
31

Did you find out what was going wrong

32

After testing at least 20 times on Saturday, I finally asked for a new Lampboard. On Sunday I tested 3 more times…and on the third one, it finally lit up. @Jerry_Boswijk

33

Did you change anything that made it work or do you have no idea why it suddenly worked?

34

I have no idea what I could’ve done right on that last attempt..or what I was doing wrong on the other 30 attempts…LOL @

35

Haha oke. It works and thats wat counts

1 Like
36

I’m just hoping it works at the end, because I won’t be tearing it apart…LOL! @Jerry_Boswijk

1 Like
37

Most important part is the stage 2 testing. After that you can test as much as you want during the build of the tower. Most important dont forget to put part c14 in the spot where the spaceshuttle is going to be during stage 2 testing else you wouldn’t be able to complete the test succesfull

2 Likes
38

Thanks @Jerry_Boswijk …Funny thing is…I’ve seen others talk about this part in different groups…and before I was even “awake” this morning, C14 popped into my head from previous posts…LOL!

1 Like
39

Yeah i thought you might have already seen it as so many post have been made about it. But wanted to be sure to spare you the hassle haha

40

I appreciate your help and advice…100%! @Jerry_Boswijk I am almost to the testing spot…Yaaaaaaay

1 Like