📖 [ROKR Journey] Dream Coffee Factory #5

Cozy Talks & Creative Ideas ROKR
, , ,
1

Next is the partition between the first and second floors. This part is also quite complex because it has parts connected to the moving parts below. And I had a bit of a problem; I assembled the coffee pump nozzle upside down. Luckily, I checked again and didn’t press too hard, so disassembling and redoing it didn’t cause any problems.

z7409448123181_f87ace4d10671962a26539a419893029
z7409448123181_f87ace4d10671962a26539a4198930291920×1890 677 KB

z7409447745627_5756d6133fee3d5aef4ff8a2a30c3c2e
z7409447745627_5756d6133fee3d5aef4ff8a2a30c3c2e1920×1440 531 KB

z7409447795007_532532eb8db8a30bad59e6ad0b628078
z7409447795007_532532eb8db8a30bad59e6ad0b6280781920×1440 669 KB

When working on this part, don’t forget the black belt. I almost got it stuck because I was busy with other details.
z7409447540219_a37ac451b7c07793d276ecccdd049a34
z7409447540219_a37ac451b7c07793d276ecccdd049a341920×1440 467 KB

Still dealing with gears, pay attention to where the lever is attached because you can easily attach it incorrectly. We will attach it, always ensuring the gears mesh together.

z7409447967175_ae493fd9cdef77bf7413bdabc124aa30
z7409447967175_ae493fd9cdef77bf7413bdabc124aa301920×2145 1.22 MB

z7409447674039_dd2523e8870fa465e92270f3099ce59d
z7409447674039_dd2523e8870fa465e92270f3099ce59d1920×2029 847 KB

z7409447889271_ba9cbb854c09c37ac7a51dfc0b15d8f4
z7409447889271_ba9cbb854c09c37ac7a51dfc0b15d8f41920×1440 577 KB

Next is the rather difficult part: connecting them to the motor below via the belt. Any misalignment will affect everything. After assembly, I recommend checking if everything is working properly so you can make adjustments. Because after that, there will be parts that cover the drive mechanisms. If they don’t work, you will have to disassemble a lot of things.

z7409447516903_97271d044800ec51a37bf2799cea1c0a
z7409447516903_97271d044800ec51a37bf2799cea1c0a1920×2560 845 KB

z7409447437705_4a09b4a6af73d74793a7f3e1fda40167
z7409447437705_4a09b4a6af73d74793a7f3e1fda401671920×2560 760 KB

z7409448065605_b7e88a37616b366e54c3f3befed3d724
z7409448065605_b7e88a37616b366e54c3f3befed3d7241920×2560 1 MB

z7409447483339_465e0a7dedcbd7afe8acb33c33069f8d
z7409447483339_465e0a7dedcbd7afe8acb33c33069f8d1920×2491 833 KB

z7409447565405_fe989b3835d7c01ca43e10f79ac40c98
z7409447565405_fe989b3835d7c01ca43e10f79ac40c981920×2560 698 KB

z7409447852244_cf1919705c2c681127ad87dce3c3ce60
z7409447852244_cf1919705c2c681127ad87dce3c3ce601920×2560 925 KB

z7409448006129_a854d006de913af1a6965fa71fb41522
z7409448006129_a854d006de913af1a6965fa71fb415221920×2560 734 KB

So, the animation part is done. Tomorrow I’ll continue with wiring the lights.

14 Likes
2

Sounds complicated. Good thing you were able to fix the issues early on. Thank you for your tips, this will surely come handy in the future.

2 Likes
3

You’re welcome.

4

I’m always learning from you. :heart_eyes: It’s great that you’ve resolved the issues quick. So amazing as always since I don’t have a confidence to build complicated kits for now.

5

This is looking very nice…but that misspelling on the COFFEE sign would lead me to NOT purchase this model.

1 Like
6

Oh my! I didn’t notice this on first look. I hope Robotime will fix the typo.

1 Like
7

I noticed that in a previous post too. But it looks like a paper cut out so I hope they can easily remedy this.

8

Beautiful work @ThaoNguyen! It does seem complicated so I’m sure your tips will be super helpful! I didn’t realise it’s so pink! :pink_heart:

9

These are great tips! Good job on the progress.. I can only imagine how finicky this feels. It feels harder than the Dream Gift Factory :stuck_out_tongue:

10

looks like a difficult part to put together with the lights cable running trough it and several tabs going in and parts sticking trough it.

1 Like
11

Wow, this part really is one of the trickiest! You handled it perfectly though. Great catch fixing the nozzle in time. Thanks for sharing all these tips, they’re going to be super helpful for anyone building this kit! :smiling_face:

1 Like
12

You can try with the simpler sets first.

1 Like
13

Oh my god. I didn’t notice either until you pointed it out.

14

Thank you @JDisaduck @Orangesareus @Jerry_Boswijk

2 Likes
15

You’re welcome

16

Yes, I think I will start on bouquet Rokr kits first since I think that will be easier. :laughing:

1 Like
17

This is looking great. :+1: looking forward to your next update.

18

@ThaoNguyen your progress is amazing & it’s really looking great! Very detailed explanations. Love the colours :blush:

19

Thank you @Tricia12 @Terii

1 Like
20

You’re welcome